Brawny
Visitor
|
Re:Loop record layers resample mode - 2005/03/09 01:58
Loops and bars:
What I'm thinking is that in one mode, you record a bar, you release 'hold,' It immediatley starts recording again. This should have two modes within it.
In one mode, the hold button should function like this: one press engages recording, **another press disengages the intial recording and starts overdubbing in layers the length of the initial recording, another press ceases recording (and continues playback), another press continues loop recording, another ceases recording and continues playback, etc.. In this mode, the loop is stuck at the same length and the phrases you layer on top are the same length. Switching into mode 2 explained below at the * enables recording longer phrases on top of this initial loop length. (Mode 2 can function without switching to it from mode 1 also.)
In the second moode, the hold button should function like this: One press engages recording, *another press disengages the intial recording and starts overdubbing a length constituting a multiple integer of the initial length, another press defines this length and begins recoding another length at a multiple of the just previously defined length, etc.. Another button alltogether should stop recording and allow playback (or a doulbe tap of hold). You should be able to switch to mode 1 explained above at the **.
Both of these modes should allow resampling so the buffer doesn't get too fat but musolomo traditional non-resampling should be available too.
In terms of 3 bars over 2, Musolomo could figure out what an even 6 bars should be resampled. Maybe this should be an option, and the other option is to cut off the last bar in the 3 bars over 2.
Yeah
|
